Kitchen worktop fitting in Swindon

When does kitchen worktop fitting make sense in Swindon?

If your Wiltshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

When a Swindon kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units. We cover all of Swindon, including the SN1, SN25 and SN26 postcode districts, and travel out to neighbouring towns across Wiltshire.

What is included in the work?

After the survey visit we write the scope down. For kitchen worktop fitting in Swindon it usually covers:

Matching upstands fitted and the joint to the wall sealed
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Old worktops removed and taken away, with the sink and hob disconnected safely
Undermount sink and hob cut-outs cut and finished by the stone fabricator

Kitchen worktop fitting prices in Swindon

Typical kitchen worktop fitting prices for homes in Swindon, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the South West are broadly in line with UK averages.

Kitchen worktop fitting prices in Swindon
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£520–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£930–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,300
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,600
Old worktops removed and taken awayMore for stone	£80–£260

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Swindon homes

You will find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates throughout Wiltshire. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

What rules apply to kitchen worktop fitting in Swindon?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Getting the most from your kitchen worktop fitting

Before templating day at your Swindon home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Swindon

How much does kitchen worktop fitting cost in Swindon?

For laminate worktops, supplied and fitted, budget around £520 to £1,200 including VAT in Swindon. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Swindon do you work in?

All of them. Our Wiltshire coverage takes in the whole of Swindon, including the SN1, SN25 and SN26 postcode districts, as well as surrounding towns such as Marlborough. If you are unsure, send us your postcode.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Kitchen worktop fitting in neighbouring towns

The same service is available a short drive from Swindon, including: