Kitchen Installers UK

Sink and tap installation · Greater London

Sink and tap installation in Southall

If you live in Southall and need sink and tap installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£200 to £1,300
Postcodes includeUB1
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Who usually needs sink and tap installation in Southall?

If you are fitting new stone worktops in your Southall kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.

People in Southall with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. Homes right across Southall are covered, as are nearby places such as Greenford, Heston and the villages in between.

What we cover for sink and tap installation in Southall

After the survey visit we write the scope down. For sink and tap installation in Southall it usually covers:

  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Every joint leak tested, with water flow and drainage checked before handover
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed

How much does sink and tap installation cost in Southall?

As a starting point for Southall, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

How much does sink and tap installation cost in Southall?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£260–£520
Boiling water tap installedTank under the sink, filter and power supply£200–£460
Sink moved to a new positionNew supplies and waste run£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Southall?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Southall

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

  • For a ceramic farmhouse-style sink in your Southall kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
  • Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Southall

How much does sink and tap installation cost in Southall?

Sink and tap installation in Southall typically costs £260 to £520 including VAT for plumbing in a new sink and tap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Southall as well?

Yes. As well as Southall itself, we cover the rest of Greater London and nearby towns such as Greenford and Heston. The process is the same wherever the kitchen is.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Sink and tap installation near Southall

Close to Southall? We cover these nearby towns too:

Combine sink and tap installation with other work

Free survey visit

Book a free survey visit in Southall

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price