Sink and tap installation in Greenford

Is sink and tap installation right for your Greenford kitchen?

If a new dishwasher or washing machine is going next to the sink in your Greenford home, the trap and waste connections usually need changing as well.

Some Greenford households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size. Homes right across Greenford are covered, as are nearby places such as Northolt, Southall and the villages in between.

What is included in the work?

Here is what usually goes into sink and tap installation, adjusted to your Greenford kitchen after we have measured it:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
New sink fitted, sealed and connected to the existing supplies and waste
Sink moved to a new position with new supply and waste runs
Inset sink cut-outs made on site in laminate and wood worktops
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections

Guide prices for sink and tap installation in Greenford

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for sink and tap installation in Greenford
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

House types around Greenford and what they mean for a kitchen

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Greenford

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book sink and tap installation in Greenford

Before buying a boiling water tap for your Greenford home, check its minimum water pressure and how much space it needs in the sink cupboard.
Ask whether a boiling water tap for your kitchen in Greater London needs a filter, how often it should be changed and where it will sit in the cupboard.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.

Questions about sink and tap installation in Greenford

How much does sink and tap installation cost in Greenford?

For plumbing in a new sink and tap, budget around £260 to £520 including VAT in Greenford. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Greenford as well?

Yes. As well as Greenford itself, we cover the rest of Greater London and nearby towns such as Northolt and Southall. The process is the same wherever the kitchen is.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Sink and tap installation in neighbouring towns

Neighbouring towns where we offer sink and tap installation: