Sink and tap installation · Somerset
Sink and tap installation in Shepton Mallet
From the survey to handover, sink and tap installation in Shepton Mallet is run by us as one job, with the fitters and trades booked in the right order.
Why do people in Shepton Mallet choose sink and tap installation?
If you are fitting new stone worktops in your Shepton Mallet kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.
Landlords in Somerset often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap. We cover all of Shepton Mallet, including the BA4 postcode district, and travel out to neighbouring towns across Somerset.
What is included in the work?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Every joint leak tested, with water flow and drainage checked before handover
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Sink moved to a new position with new supply and waste runs
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- New sink fitted, sealed and connected to the existing supplies and waste
How much does sink and tap installation cost in Shepton Mallet?
These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £210–£410 |
| Boiling water tap installedTank under the sink, filter and power supply | £150–£360 |
| Sink moved to a new positionNew supplies and waste run | £410–£1,000 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes around Shepton Mallet
You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.
Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.
What rules apply to sink and tap installation in Shepton Mallet?
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.
Before you book sink and tap installation in Shepton Mallet
- For a ceramic farmhouse-style sink in your Shepton Mallet kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
- Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
Questions about sink and tap installation in Shepton Mallet
How much does sink and tap installation cost in Shepton Mallet?
Guide prices in Shepton Mallet are about £210 to £410 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you work near Shepton Mallet as well?
Yes. As well as Shepton Mallet itself, we cover the rest of Somerset and nearby towns such as Wells and Glastonbury. The process is the same wherever the kitchen is.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Also covering nearby towns
Neighbouring towns where we offer sink and tap installation:
- Sink and tap installation in Wells
- Sink and tap installation in Glastonbury
- Sink and tap installation in Frome
- Sink and tap installation in Bath
- Sink and tap installation in Keynsham
- Sink and tap installation in Warminster
- Sink and tap installation across Somerset