Kitchen Installers UK

Kitchen plumbing · England

Kitchen plumbing in Surrey

If you need kitchen plumbing anywhere in Surrey, we survey the kitchen, agree the scope with you and book every trade through to handover.

Guide price£230 to £1,700
Towns covered25 towns, including Woking
TimescaleHalf a day to 2 days, split between first fix and second fix
First-fix supply pipes and a waste pipe coming through a stripped kitchen wall where the new sink will be fitted

Why kitchen plumbing for a Surrey home?

If your Surrey home has a solid concrete ground floor, a new sink or appliance position may mean cutting a channel for the waste, which is worth planning before the units arrive.

People adding a boiling water tap in Surrey usually need a fresh cold feed and room under the sink for the tank, planned alongside the sink unit.

What does kitchen plumbing in Surrey include?

After the survey visit we write the scope down. For kitchen plumbing in Surrey it usually covers:

  • A survey of the stopcock, supply pipes, waste route and drain connection
  • Hot and cold supplies run to the new sink position
  • Isolation valves on each tap and appliance feed for quick shut-off
  • Dishwasher and washing machine supplies, with waste connections through suitable traps
  • Waste pipes laid to a steady fall, with an access point for clearing blockages
  • Radiators moved or replaced so they clear the new units
  • A cold feed for a boiling water tap tank or a fridge with a water dispenser
  • Redundant pipes cut back to the live supply and capped, then a full leak check

How much does kitchen plumbing cost in Surrey?

Typical kitchen plumbing prices for homes in Surrey, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

How much does kitchen plumbing cost in Surrey?
Typical projectGuide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Kitchens in homes across Surrey

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Joining the kitchen and dining room in a 1930s semi, often with a peninsula and seating, is a common project. Larger detached houses tend to suit a supply-and-fit kitchen with an island, a boiling water tap, a separate utility and lighting planned in zones.

Rules for kitchen plumbing in Surrey

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Before you start

  • Put the dishwasher next to the sink so its supply and waste stay short, easy to reach and less likely to block.
  • Ask for redundant pipes to be removed back to the live supply rather than left behind units, where they can hold stale water or leak.
  • Find out whether the kitchen floor is suspended timber or solid concrete, as a waste run across concrete means cutting and reinstating the floor.
  • Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.
  • Measure the cupboard under your sink before buying a boiling water tap for your Surrey kitchen, as the tank and pipework need clear space.
  • In a flat in Surrey, check your lease before moving the sink, as moving services usually needs the freeholder's written consent.

Questions about kitchen plumbing in Surrey

How much does kitchen plumbing cost in Surrey?

For connecting the sink, dishwasher and washing machine, budget around £230 to £580 including VAT in Surrey. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Surrey?

Yes. We carry out kitchen plumbing across Surrey, including Woking, Guildford, Esher and Redhill. Every job starts with a free survey visit and an itemised written quote.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Kitchen plumbing in towns across Surrey

Choose a town for local guide prices and postcode coverage:

Kitchen plumbing in nearby areas

Free survey visit

Book a free survey visit in Surrey

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price