Kitchen plumbing in Bordon

Thinking about kitchen plumbing in Bordon?

People adding a boiling water tap in Bordon usually need a fresh cold feed and room under the sink for the tank, planned alongside the sink unit.

In older properties across Hampshire, kitchen pipework has often been extended many times over; a refit is the chance to replace it with a tidy, accessible layout. Homes right across Bordon are covered, as are nearby places such as Alton, Farnham and the villages in between.

What we cover for kitchen plumbing in Bordon

Here is what usually goes into kitchen plumbing, adjusted to your Bordon kitchen after we have measured it:

Hot and cold supplies run to the new sink position
A cold feed for a boiling water tap tank or a fridge with a water dispenser
A survey of the stopcock, supply pipes, waste route and drain connection
Dishwasher and washing machine supplies, with waste connections through suitable traps
Radiators moved or replaced so they clear the new units
Isolation valves on each tap and appliance feed for quick shut-off

What should you budget for kitchen plumbing in Bordon?

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Bordon kitchen. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for kitchen plumbing in Bordon?
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Local homes and their kitchens

In and around Bordon, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Do you need approval for kitchen plumbing in Bordon?

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Getting the most from your kitchen plumbing

Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
Measure the cupboard under your sink before buying a boiling water tap for your Bordon kitchen, as the tank and pipework need clear space.
Locate the stopcock in your Bordon home and check it turns before fitting day; a seized one may need replacing before the plumber can start.
Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.

Questions about kitchen plumbing in Bordon

How much does kitchen plumbing cost in Bordon?

Kitchen plumbing in Bordon typically costs £230 to £580 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Bordon before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Bordon. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

Kitchen plumbing in neighbouring towns

Neighbouring towns where we offer kitchen plumbing: