Kitchen installation in Taunton

Why kitchen installation for a Taunton home?

A new layout is a common reason to change kitchens in Taunton: moving the sink under the window, adding an island or opening up to the dining room.

If you have bought a kitchen online or from a trade counter for your Taunton home, we can check the delivery against the plan and fit it properly. If your home is in Taunton or close by in Bridgwater or Chard, the same survey, quote and fitting process applies.

What is in a typical job?

After the survey visit we write the scope down. For kitchen installation in Taunton it usually covers:

First-fix electrics and plumbing for the new layout
Sink, tap and integrated appliances fitted and connected
Free survey visit, measurements and an itemised written quote
Base, wall and tall units fixed, levelled and secured to the wall
Gas hobs connected only by Gas Safe registered engineers
Removal and disposal of the old kitchen, with gas and electrics made safe

What does kitchen installation cost in Taunton?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Taunton kitchen. Costs in the South West sit close to the national guide.

What does kitchen installation cost in Taunton?
Typical project	Guide price
Small kitchen, 5–10 units, fit onlyYour units fitted, laminate worktop, sink and appliance connections	£1,500–£2,600
Medium kitchen, 10–15 units, fit onlyAs above, for a typical family kitchen	£2,600–£3,600
Large kitchen, 15+ units or an island, fit onlyTall larders, island, more cut-outs and panels	£3,600–£4,600
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances, fitting and the usual trades	£18,500–£36,000

Fit-only guide ranges cover labour for units, laminate worktops and standard connections; stone worktops, new circuits, moved services, tiling, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

Kitchens in homes around Taunton

You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Do you need approval for kitchen installation in Taunton?

Fitting a new kitchen does not need planning permission in England. Listed building consent may be needed if the building is listed, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent. Electrical work must meet BS 7671, and new circuits or a new consumer unit are notifiable under Part P, so they are certified through a competent person scheme or building control. New extraction should be designed to Approved Document F rates (about 30 litres per second for a hood ducted outside), a refit should not leave ventilation worse than before, and only Gas Safe registered engineers may connect a gas hob.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Tips before you start

Check that your Taunton delivery can reach the kitchen: tall larder units and long worktops need clear access through doors and stairs.
Keep the delivery note and plan together until the fit, so any missing parts can be reported to the supplier quickly.
If your house in Somerset is older, ask for the walls to be checked for level; out-of-true walls change how units and worktops are scribed.
Leave every box sealed until the fit; parts get lost or damaged once packaging is opened and stacked around the house.

Questions about kitchen installation in Taunton

How much does kitchen installation cost in Taunton?

Kitchen installation in Taunton typically costs £1,500 to £2,600 including VAT for a small kitchen of 5 to 10 units, fit only, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Taunton?

Yes. We work across Taunton, including the TA1 postcode district, and nearby towns such as Bridgwater and Chard. Book a free survey visit and we will arrange a time that suits you.

Can I use my kitchen during the installation?

Not for most of it. Once the old kitchen comes out there is no sink or cooker until the new one is connected, usually a week or two for an average kitchen. We plan the job so the water and power are off for as little time as possible, and we tell you which days will be the most disruptive.

Do I need building regulations approval for a new kitchen?

Usually only for parts of the job. Fitting units does not need approval, but new electrical circuits are notifiable in England and Wales, removing a load-bearing wall needs approval everywhere, and in Scotland structural work needs a building warrant. Gas work must always be done by a Gas Safe registered engineer.

What order does a kitchen installation follow?

The usual sequence is strip-out, any structural work, first-fix electrics and plumbing, plastering, base and wall units, worktops, second fix of sockets, sink, tap and appliances, then splashbacks, flooring and decorating. Some floors go down before the units and some after, depending on the floor type, which we agree at the survey.

Kitchen installation near Taunton

Neighbouring towns where we offer kitchen installation: