Kitchen Installers UK

Kitchen electrics · Cambridgeshire

Kitchen electrics in Cambridge

Homeowners and landlords in Cambridge can book us for kitchen electrics: sockets, appliance circuits and isolation switches planned around your layout, tested and certified.

Guide price£270 to £1,600
Postcodes includeCB5, CB21, CB22 and CB23
Timescale1 to 3 days, split between first fix and second fix
An electrician fixing a double socket to a newly plastered kitchen wall above the base units, before the tiling goes on

What prompts kitchen electrics in Cambridge?

Open-plan kitchen-diners in Cambridgeshire need power in places a closed kitchen never did, such as an island, a breakfast bar or a dining-side wall for a wine cooler.

Buyers of older houses across Cambridgeshire sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in. Our Cambridgeshire coverage reaches every part of Cambridge (CB5, CB21, CB22, CB23 and CB24) and out towards Newmarket.

What do kitchen electrics in Cambridge include?

After the survey visit we write the scope down. For kitchen electrics in Cambridge it usually covers:

  • Testing, the correct certificate, and notification of the work where it is required
  • A dedicated circuit for an oven, range cooker or induction hob where needed
  • Supplies for the cooker hood, under-cabinet lights and a boiling water tap
  • Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
  • First-fix cables and back boxes run before plastering or boarding
  • A check of the consumer unit, existing circuits and earthing before the layout is fixed

How much do kitchen electrics cost in Cambridge?

Use these ranges to plan your budget. They include VAT, reflect costs in the East of England, and are firmed up once we have seen your Cambridge kitchen. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.

How much do kitchen electrics cost in Cambridge?
Typical projectGuide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout£270–£540
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting£540–£1,600
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified£320–£760

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Cambridge homes

Across Cambridgeshire you will often find Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses, and each shapes the kitchen differently. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.

Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about. Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops.

Regulations for kitchen work in Cambridge

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.

Practical advice for Cambridge homeowners

  • If you let a property in Cambridgeshire, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
  • Walk round your Cambridge kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
  • Find your consumer unit and take a photo of it before the survey of your Cambridge home, so the electrician can see straight away whether it has spare ways.
  • Keep sockets and switches sensibly clear of the sink and hob, away from splashing water and heat, and agree the positions on the plan.

Questions about kitchen electrics in Cambridge

How much do kitchen electrics cost in Cambridge?

For extra sockets or spurs on existing circuits, budget around £270 to £540 including VAT in Cambridge. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.

Do you work near Cambridge as well?

Yes. As well as Cambridge itself, we cover the rest of Cambridgeshire and nearby towns such as Newmarket and Saffron Walden. The process is the same wherever the kitchen is.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Kitchen electrics in neighbouring towns

Neighbouring towns where we offer kitchen electrics:

More services for Cambridge kitchens

Free survey visit

Book a free survey visit in Cambridge

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price