Kitchen electrics in Bexley

Who usually needs kitchen electrics in Bexley?

Open-plan kitchen-diners in Greater London need power in places a closed kitchen never did, such as an island, a breakfast bar or a dining-side wall for a wine cooler.

Buyers of older houses across Greater London sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in. We cover all of Bexley, including the DA15 postcode district, and travel out to neighbouring towns across Greater London.

What do kitchen electrics in Bexley include?

The exact scope is agreed after the survey, but a typical job in Bexley covers:

Supplies for the cooker hood, under-cabinet lights and a boiling water tap
A check of the consumer unit, existing circuits and earthing before the layout is fixed
First-fix cables and back boxes run before plastering or boarding
Testing, the correct certificate, and notification of the work where it is required
Accessible isolation switches for integrated appliances, reachable without pulling units out
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar

What do kitchen electrics cost in Bexley?

The figures below are guide prices for Bexley, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What do kitchen electrics cost in Bexley?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£320–£650
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£650–£2,000
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£390–£910

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Bexley

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Walk round your Bexley kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Choose socket and switch finishes before second fix, especially metal faceplates, so they arrive in time and sit well with the handles and tap.
Find your consumer unit and take a photo of it before the survey of your Bexley home, so the electrician can see straight away whether it has spare ways.
Ask for isolation switches for the dishwasher, fridge and washing machine to be reachable without moving an appliance or a unit.

Questions about kitchen electrics in Bexley

How much do kitchen electrics cost in Bexley?

For extra sockets or spurs on existing circuits, budget around £320 to £650 including VAT in Bexley. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Bexley as well?

Yes. As well as Bexley itself, we cover the rest of Greater London and nearby towns such as Welling and Dartford. The process is the same wherever the kitchen is.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

What paperwork should I get for kitchen electrics?

You should get an Electrical Installation Certificate for any new circuit and a Minor Electrical Installation Works Certificate for additions to an existing circuit, such as extra sockets. In England and Wales, notifiable work is also registered with the council through a competent person scheme or building control, and a compliance certificate follows. Keep these papers safe, because buyers' solicitors and letting agents often ask for them.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Nearby places we cover

We also carry out kitchen electrics in these towns near Bexley: