Fit-only kitchen fitting in Bexley

When does fit-only kitchen fitting make sense in Bexley?

A Bexley kitchen with sound walls and services already in the right place suits fit only well, because the job is mainly units, worktops and connections.

If you have chosen stone worktops for a Bexley kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template. Bexley sits about 13 miles east of Westminster, and our Greater London coverage takes in everything in between.

What does fit-only kitchen fitting in Bexley include?

The exact scope is agreed after the survey, but a typical job in Bexley covers:

End panels, filler panels, plinths, cornice and light rail scribed and fitted
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Delivery checked against the plan and delivery note before fitting starts
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Free survey visit to check your plan, the room and the service positions

What should you budget for fit-only kitchen fitting in Bexley?

As a starting point for Bexley, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for fit-only kitchen fitting in Bexley?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£2,000–£3,200
Medium kitchen (10–15 units)As above	£3,200–£4,600
Large kitchen (15+ units, island or tall larders)As above	£4,600–£5,800
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£230–£360 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

House types around Bexley and what they mean for a kitchen

In and around Bexley, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Bexley

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your fit-only kitchen fitting

Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Book the fit for a date after the full delivery has arrived in Greater London; a split delivery is a common reason for a fit stalling halfway.
Photograph each pallet and any damaged box as it arrives at your Bexley address, and note the damage on the delivery note before the driver leaves.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Bexley

How much does fit-only kitchen fitting cost in Bexley?

For a small kitchen of 5 to 10 units, budget around £2,000 to £3,200 including VAT in Bexley. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Bexley as well?

Yes. As well as Bexley itself, we cover the rest of Greater London and nearby towns such as Welling and Dartford. The process is the same wherever the kitchen is.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Nearby places we cover

The same service is available a short drive from Bexley, including: