Replacement kitchen doors in Bexley

Thinking about replacement kitchen doors in Bexley?

When one door in a Bexley kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.

If your Greater London kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound. Kitchens in every part of Bexley are covered, and the survey visit is free wherever you are in Greater London.

What is included in the work?

After the survey visit we write the scope down. For replacement kitchen doors in Bexley it usually covers:

Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
Handles or knobs drilled from a template so they sit at a consistent height
New fronts fixed to integrated appliances with their door-fixing kits
Hinge holes drilled to line up with the positions on your carcasses
New soft-close hinges fitted and every door adjusted so the gaps run even

Guide prices for replacement kitchen doors in Bexley

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Bexley kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for replacement kitchen doors in Bexley
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,300–£3,900
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,600–£6,500
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£390–£1,000
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£200–£780

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for replacement kitchen doors in Bexley?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
If you let out a Bexley property, new doors can often be fitted between tenancies in a day or two once they have been delivered.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Bexley

How much do replacement kitchen doors cost in Bexley?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,300 to £3,900 including VAT in Bexley. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of Bexley?

Yes. We work across Bexley, including the DA15 postcode district, and nearby towns such as Welling and Dartford. Book a free survey visit and we will arrange a time that suits you.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Nearby places we cover

Neighbouring towns where we offer replacement kitchen doors: