Kitchen Installers UK

Integrated appliance installation · Hampshire

Integrated appliance installation in Andover

Looking for integrated appliance installation in Andover? We survey, quote and carry out integrated appliance installation for homes across Andover and the rest of Hampshire, with one contract from the first measure to the final check.

Guide priceFrom £50 each
Postcodes includeSP10
TimescaleUsually part of the fit
An installer adjusting the door of an integrated dishwasher so it lines up with the drawer fronts beside it

Why integrated appliance installation for an Andover home?

Landlords in Hampshire choosing integrated appliances for a rental kitchen want them fixed securely and plumbed with accessible valves, so a later replacement is straightforward.

In a smaller Andover kitchen, an under-counter fridge and a slimline dishwasher behind kitchen doors can make room on the worktop and floor without changing the layout. If your home is in Andover or close by in Winchester or Newbury, the same survey, quote and fitting process applies.

What we cover for integrated appliance installation in Andover

Your written quote lists everything included. For integrated appliance installation, that normally means:

  • Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
  • Built-in ovens and microwaves fixed into housings with the required ventilation space
  • Integrated fridges and freezers fixed into tall or under-counter housings
  • Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned
  • Leak checks, final door adjustments and each appliance switched on and tested
  • Dishwashers anchored under the worktop, levelled and connected to the supply and waste

Guide prices for integrated appliance installation in Andover

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Andover kitchen. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for integrated appliance installation in Andover
Typical projectGuide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted£50–£90 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check£90–£210
Built-in oven fitted, like for likeOn an existing suitable circuit£140–£290
New cooker circuit from the consumer unitOften needed for a double oven or induction hob£340–£800

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Andover?

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Andover

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book integrated appliance installation in Andover

  • Make sure the plinths in front of fridges and freezers include the ventilation grille or gap the appliance manufacturer asks for, not a solid panel.
  • Keep integrated appliances boxed until the fitter arrives, so any that do not suit their housings can be returned unopened to the retailer.
  • If you are replacing a single integrated appliance in your kitchen in Hampshire, note the old model number, as it helps find a replacement with matching dimensions.
  • Check the installation dimensions in each appliance manual against the housing before buying; a few millimetres out can stop a door closing.

Questions about integrated appliance installation in Andover

How much does integrated appliance installation cost in Andover?

For fitting an integrated appliance into its housing, budget around £50 to £90 each including VAT in Andover. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Andover?

Yes. We work across Andover, including the SP10 postcode district, and nearby towns such as Winchester and Newbury. Book a free survey visit and we will arrange a time that suits you.

Can you fit integrated appliances I have bought separately?

Yes. Appliances bought from any retailer can be fitted, as long as they match the housings. Send us the model numbers before the survey so we can check the installation dimensions, door-fixing method and connections. If an appliance does not suit the housing, it is far easier to exchange it unopened than to alter the units around it.

Do built-in appliances need their own switch?

It is good practice under BS 7671 for built-in appliances to have an accessible means of isolation, for example a switched fused spur above the worktop, so they can be switched off without being pulled out. Some layouts use an accessible socket in a neighbouring cupboard instead. Manufacturers' instructions often cover this too, and the electrician confirms the right arrangement for your kitchen.

What is the difference between fixed-hinge and sliding-hinge integrated fridges?

On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.

Also covering nearby towns

The same service is available a short drive from Andover, including:

More services for Andover kitchens

Free survey visit

Book a free survey visit in Andover

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price