Integrated appliance installation · Hampshire
Integrated appliance installation in Romsey
If you live in Romsey and need integrated appliance installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Is integrated appliance installation right for your Romsey kitchen?
In a smaller Romsey kitchen, an under-counter fridge and a slimline dishwasher behind kitchen doors can make room on the worktop and floor without changing the layout.
If your kitchen in Romsey has a dishwasher door that sits proud or a fridge door that drops, the cause is often the fitting or the housing rather than the appliance. Homes right across Romsey are covered, as are nearby places such as Totton, Eastleigh and the villages in between.
What is in a typical job?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Built-in ovens and microwaves fixed into housings with the required ventilation space
- Integrated fridges and freezers fixed into tall or under-counter housings
- Leak checks, final door adjustments and each appliance switched on and tested
- Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
- Accessible switching for built-in appliances, such as a switched fused spur, where needed
- Dishwashers anchored under the worktop, levelled and connected to the supply and waste
Integrated appliance installation prices in Romsey
The figures below are guide prices for Romsey, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted | £50–£90 each |
| Dishwasher or washing machine plumbed inValve, waste connection and leak check | £90–£210 |
| Built-in oven fitted, like for likeOn an existing suitable circuit | £140–£290 |
| New cooker circuit from the consumer unitOften needed for a double oven or induction hob | £340–£800 |
Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Romsey homes
Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Regulations for kitchen work in Romsey
Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Before you book integrated appliance installation in Romsey
- Make sure the plinths in front of fridges and freezers include the ventilation grille or gap the appliance manufacturer asks for, not a solid panel.
- Check that the furniture doors for your dishwasher and fridge are the correct height and drilled for the right fixings before fitting day comes round.
- If you are replacing a single integrated appliance in your kitchen in Hampshire, note the old model number, as it helps find a replacement with matching dimensions.
- Washing machines need a firm, level floor; a springy timber floor or an unstable plinth can let the machine move and vibrate during a spin.
Questions about integrated appliance installation in Romsey
How much does integrated appliance installation cost in Romsey?
Guide prices in Romsey are about £50 to £90 each including VAT for fitting an integrated appliance into its housing. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Romsey?
Yes. We work across Romsey, including the SO51 postcode district, and nearby towns such as Totton and Eastleigh. Book a free survey visit and we will arrange a time that suits you.
What is the difference between fixed-hinge and sliding-hinge integrated fridges?
On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.
Can you fit integrated appliances I have bought separately?
Yes. Appliances bought from any retailer can be fitted, as long as they match the housings. Send us the model numbers before the survey so we can check the installation dimensions, door-fixing method and connections. If an appliance does not suit the housing, it is far easier to exchange it unopened than to alter the units around it.
Why does an integrated dishwasher need fixing under the worktop?
Because a dishwasher can tip forward when the loaded door and racks are pulled out, and it moves slightly as it runs. It is anchored with the brackets supplied, usually to the underside of the worktop or to the side panels, then levelled so its door lines up with the drawer fronts beside it. Stone worktops usually need the side fixings rather than screws from below.
Integrated appliance installation near Romsey
The same service is available a short drive from Romsey, including:
- Integrated appliance installation in Totton
- Integrated appliance installation in Eastleigh
- Integrated appliance installation in Southampton
- Integrated appliance installation in Winchester
- Integrated appliance installation in Hythe, Hampshire
- Integrated appliance installation in Salisbury
- Integrated appliance installation across Hampshire
