Kitchen underfloor heating in Andover

Who usually needs kitchen underfloor heating in Andover?

If your Andover kitchen opens onto a dining area through a wide opening, one heated floor can run across both, with the units left unheated.

If you are laying a new tiled floor in your Andover kitchen anyway, that is the natural moment to put electric heating mats underneath it. Our Hampshire coverage reaches every part of Andover (SP10) and out towards Winchester.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Door thresholds and plinth heights checked against the new floor build-up
Electric mats or cables, or wet pipework connected through a manifold
A new circuit or fused spur, plus a thermostat with a floor sensor
A survey of the subfloor, open floor area and existing heating system
Plinth heaters fitted under base units where wall space for a radiator is short
A heating layout drawn to the kitchen plan, clear of units and appliances

Kitchen underfloor heating prices in Andover

Typical kitchen underfloor heating prices for homes in Andover, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Kitchen underfloor heating prices in Andover
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Andover homes

In and around Andover, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Regulations for kitchen work in Andover

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Getting the most from your kitchen underfloor heating

Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Andover kitchen.
Choose your floor finish first and check its maximum surface temperature, as it decides the thermostat setting and the type of system.
Photograph the heating mats or pipes before the floor goes down, so you know where they run if you ever need to drill into it.
Check the new floor build-up height early; it affects door thresholds, plinth heights and whether integrated appliances still fit under the worktop.

Questions about kitchen underfloor heating in Andover

How much does kitchen underfloor heating cost in Andover?

Kitchen underfloor heating in Andover typically costs £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Andover before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Andover. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Kitchen underfloor heating in neighbouring towns

Close to Andover? We cover these nearby towns too: