Splashbacks and tiling in Southsea

Who usually needs splashbacks and tiling in Southsea?

If the units in your Southsea kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Landlords around Hampshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. If your home is in Southsea or close by in Portsmouth or Gosport, the same survey, quote and fitting process applies.

What do splashbacks and tiling in Southsea include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed
Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

Splashbacks and tiling prices in Southsea

As a starting point for Southsea, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Splashbacks and tiling prices in Southsea
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Southsea and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

What rules apply to splashbacks and tiling in Southsea?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Southsea homeowners

Hold a few of your chosen tiles against the wall in your Southsea kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Ask to see where the tiling will start before the first row goes on in your Southsea kitchen, so narrow cut tiles end up in corners rather than on show.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Southsea

How much do splashbacks and tiling cost in Southsea?

Splashbacks and tiling in Southsea typically cost £170 to £460 including VAT for a tiled splashback, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Southsea as well?

Yes. As well as Southsea itself, we cover the rest of Hampshire and nearby towns such as Portsmouth and Gosport. The process is the same wherever the kitchen is.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Nearby places we cover

The same service is available a short drive from Southsea, including: