Kitchen Installers UK

Hob and oven installation · Hampshire

Hob and oven installation in Portsmouth

From the survey to handover, hob and oven installation in Portsmouth is run by us as one job, with the fitters and trades booked in the right order.

Guide price£140 to £920
Postcodes includePO5
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Portsmouth kitchen?

Keen cooks across Hampshire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

Landlords in Hampshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. Our Hampshire coverage reaches every part of Portsmouth (PO5) and out towards Southsea.

What is included in the work?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Old hob or oven disconnected safely and taken away for recycling

What should you budget for hob and oven installation in Portsmouth?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for hob and oven installation in Portsmouth?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Portsmouth

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Portsmouth

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Portsmouth homeowners

  • If you are moving the hob in your Portsmouth kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Portsmouth

How much does hob and oven installation cost in Portsmouth?

Hob and oven installation in Portsmouth typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Portsmouth?

Yes. We work across Portsmouth, including the PO5 postcode district, and nearby towns such as Southsea and Gosport. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation near Portsmouth

Neighbouring towns where we offer hob and oven installation:

Planning more than one job in Portsmouth?

Free survey visit

Book a free survey visit in Portsmouth

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price