Kitchen Installers UK

Hob and oven installation · North Yorkshire

Hob and oven installation in Selby

Looking for hob and oven installation in Selby? We survey, quote and carry out hob and oven installation for homes across Selby and the rest of North Yorkshire, with one contract from the first measure to the final check.

Guide price£110 to £760
Postcodes includeYO8
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Thinking about hob and oven installation in Selby?

Landlords in North Yorkshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

Families in Selby adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Kitchens in every part of Selby are covered, and the survey visit is free wherever you are in North Yorkshire.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Selby covers:

  • Gas supply moved to a new hob position, with pipework tested and made good
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Old hob or oven disconnected safely and taken away for recycling
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

What should you budget for hob and oven installation in Selby?

The figures below are guide prices for Selby, including VAT and adjusted for typical costs across Yorkshire and the Humber. The fixed price comes after we have measured up. Costs across Yorkshire and the Humber tend to sit under UK averages, which these ranges reflect.

What should you budget for hob and oven installation in Selby?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£380
New gas pipe run to a new hob positionPipework, testing and making good£240–£760

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Selby homes

In and around Selby, homes range across stone-built cottages, Victorian terraces, Georgian townhouses and post-war semis. Dales and moorland stone cottages often have a small kitchen in a rear extension, while terraces in York and Middlesbrough tend to have a narrow back galley.

Water hardness varies across North Yorkshire, from soft in some upland areas to moderately hard elsewhere, so check with your supplier before choosing a filter. Dales and moorland roads can be narrow and steep, and older streets in York can have restricted parking, so delivery vehicles and timing need planning.

Building regulations, electrics and gas in Selby

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes in the Yorkshire Dales or North York Moors national parks, York's many listed buildings and conservation areas may need consent for new vents or internal changes.

Planning ahead

  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in North Yorkshire can be cut correctly by the fabricator.
  • Before buying an induction hob for your Selby home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • If you are replacing an old cooker with a separate hob and oven in your Selby kitchen, ask for the gas supply position and condition to be checked first.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Selby

How much does hob and oven installation cost in Selby?

Guide prices in Selby are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Selby?

Yes. We work across Selby, including the YO8 postcode district, and nearby towns such as Goole and Pontefract. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation in neighbouring towns

Neighbouring towns where we offer hob and oven installation:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Selby

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price