Flat-pack kitchen fitting in Oldham

When does flat-pack kitchen fitting make sense in Oldham?

If you are fitting a utility room as well as a kitchen in Oldham, flat-pack units for both rooms can be built and fitted as part of the same job.

If you have bought a flat-pack kitchen for your Oldham home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. Kitchens in every part of Oldham are covered, and the survey visit is free wherever you are in Greater Manchester.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate worktops cut and jointed, with cut edges sealed around the sink
Base units levelled on adjustable legs and fixed to the wall and to each other
Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room

What does flat-pack kitchen fitting cost in Oldham?

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Costs across the North West tend to sit under UK averages, which these ranges reflect.

What does flat-pack kitchen fitting cost in Oldham?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,700–£4,000
Large flat-pack kitchen with tall units, built and fittedAs above	£3,800–£5,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

Regulations for kitchen work in Oldham

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Tips before you start

If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If the flat-pack sink base in your Oldham kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Oldham

How much does flat-pack kitchen fitting cost in Oldham?

Flat-pack kitchen fitting in Oldham typically costs £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Oldham as well?

Yes. As well as Oldham itself, we cover the rest of Greater Manchester and nearby towns such as Chadderton and Royton. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting in neighbouring towns

The same service is available a short drive from Oldham, including: