Kitchen Installers UK
0800 088 6341 Get a guide price

Hob and oven installation · England

Hob and oven installation in Hertfordshire

Homeowners and landlords across Hertfordshire can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£130 to £860
Towns covered19 towns, including Watford
Timescale2 to 4 hours for most hobs and ovens
Get a guide price Book a free survey visit
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Hertfordshire kitchen?

If the oven in your Hertfordshire kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.

A new kitchen layout in Hertfordshire sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

What does hob and oven installation in Hertfordshire include?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling

How much does hob and oven installation cost in Hertfordshire?

As a starting point for Hertfordshire, these ranges include VAT at 20% and allow for typical labour costs in the East of England. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

How much does hob and oven installation cost in Hertfordshire?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£130–£320
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£130–£270
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£160–£430
New gas pipe run to a new hob positionPipework, testing and making good£270–£860

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes across Hertfordshire

Across Hertfordshire you will often find 1930s semis, post-war new town houses, Victorian terraces and new-build estates, and each shapes the kitchen differently. Stevenage and Hemel Hempstead new-town houses often have a small galley, while 1930s semis tend to have a narrow kitchen beside the dining room.

Hertfordshire's water is very hard, mostly drawn from chalk, so limescale on taps and boiling water taps is common and a softener or filter is worth considering. Commuter-town streets often have tight parking, and estate houses with shared parking courts can mean carrying units some distance to the front door.

Removing the wall between kitchen and dining room is a common job in a 1930s semi, often with a peninsula to separate cooking from seating. New-town houses often have small kitchens that benefit from a better layout, taller wall units and integrated appliances to save floor space.

Rules for hob and oven installation in Hertfordshire

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

A kitchen fit needs no planning permission, but listed buildings and conservation areas, including parts of St Albans and Welwyn Garden City, may need consent for external vents.

Before you start

  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
  • If your Hertfordshire home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • If you are replacing an old cooker with a separate hob and oven in your Hertfordshire kitchen, ask for the gas supply position and condition to be checked first.

Questions about hob and oven installation in Hertfordshire

How much does hob and oven installation cost in Hertfordshire?

Hob and oven installation in Hertfordshire typically costs £130 to £320 including VAT for connecting a gas hob to an existing supply, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Hertfordshire?

Yes. We carry out hob and oven installation across Hertfordshire, including Watford, Hemel Hempstead, Stevenage and St Albans. Every job starts with a free survey visit and an itemised written quote.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in towns across Hertfordshire

Choose a town for local guide prices and postcode coverage:

Hob and oven installation in nearby areas

Free survey visit

Book a free survey visit in Hertfordshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price