Flat-pack kitchen fitting in Hampton

Is flat-pack kitchen fitting right for your Hampton kitchen?

If you are fitting a utility room as well as a kitchen in Hampton, flat-pack units for both rooms can be built and fitted as part of the same job.

If you have bought a flat-pack kitchen for your Hampton home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. Kitchens in every part of Hampton are covered, and the survey visit is free wherever you are in Greater London.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate worktops cut and jointed, with cut edges sealed around the sink
Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require

What does flat-pack kitchen fitting cost in Hampton?

Typical flat-pack kitchen fitting prices for homes in Hampton, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does flat-pack kitchen fitting cost in Hampton?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Hampton?

In and around Hampton, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Hampton

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Hampton; orders can run to dozens of boxes and one short box can stall a fit.
Set aside a room next to the kitchen in your Hampton home for assembly, with enough floor space to lay a tall larder carcass down flat.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Hampton

How much does flat-pack kitchen fitting cost in Hampton?

Flat-pack kitchen fitting in Hampton typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Hampton do you work in?

All of them. Our Greater London coverage takes in the whole of Hampton, including the TW12 postcode district, as well as surrounding towns such as West Molesey. If you are unsure, send us your postcode.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

The same service is available a short drive from Hampton, including: