Hob and oven installation · County Durham
Hob and oven installation in Consett
From the survey to handover, hob and oven installation in Consett is run by us as one job, with the fitters and trades booked in the right order.

Thinking about hob and oven installation in Consett?
If the oven in your Consett kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.
Families in Consett adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. If your home is in Consett or close by in Stanley or Newburn, the same survey, quote and fitting process applies.
What does hob and oven installation in Consett include?
Here is what usually goes into hob and oven installation, adjusted to your Consett kitchen after we have measured it:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
- Gas supply moved to a new hob position, with pipework tested and made good
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Hob and oven installation prices in Consett
The figures below are guide prices for Consett, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Costs across the North East tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£270 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£220 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£360 |
| New gas pipe run to a new hob positionPipework, testing and making good | £220–£720 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Consett and what they mean for a kitchen
The housing mix across County Durham includes colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses, so no two kitchen fits are quite alike. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.
Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter. Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in.
Building regulations, electrics and gas in Consett
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.
Practical advice for Consett homeowners
- If you are moving the hob in your Consett kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in County Durham.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Consett
How much does hob and oven installation cost in Consett?
Hob and oven installation in Consett typically costs £110 to £270 including VAT for connecting a gas hob to an existing supply, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Consett do you work in?
All of them. Our County Durham coverage takes in the whole of Consett, including the DH8 postcode district, as well as surrounding towns such as Stanley. If you are unsure, send us your postcode.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Also covering nearby towns
The same service is available a short drive from Consett, including:
- Hob and oven installation in Stanley
- Hob and oven installation in Newburn
- Hob and oven installation in Chester-le-Street
- Hob and oven installation in Durham
- Hob and oven installation in Gateshead
- Hob and oven installation in Newcastle upon Tyne
- Hob and oven installation across County Durham
