Hob and oven installation · County Durham
Hob and oven installation in Durham
Looking for hob and oven installation in Durham? We survey, quote and carry out hob and oven installation for homes across Durham and the rest of County Durham, with one contract from the first measure to the final check.

Why do people in Durham choose hob and oven installation?
If your Durham kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
Some people in Durham buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. Our County Durham coverage reaches every part of Durham (DH1) and out towards Chester-le-Street.
What does the job involve?
The exact scope is agreed after the survey, but a typical job in Durham covers:
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
Guide prices for hob and oven installation in Durham
The figures below are guide prices for Durham, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£270 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£220 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£360 |
| New gas pipe run to a new hob positionPipework, testing and making good | £220–£720 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Durham
Across County Durham you will often find colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses, and each shapes the kitchen differently. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.
Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in. Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter.
What rules apply to hob and oven installation in Durham?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.
Practical advice for Durham homeowners
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If you are replacing an old cooker with a separate hob and oven in your Durham kitchen, ask for the gas supply position and condition to be checked first.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
Questions about hob and oven installation in Durham
How much does hob and oven installation cost in Durham?
Hob and oven installation in Durham typically costs £110 to £270 including VAT for connecting a gas hob to an existing supply, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Durham do you work in?
All of them. Our County Durham coverage takes in the whole of Durham, including the DH1 postcode district, as well as surrounding towns such as Chester-le-Street. If you are unsure, send us your postcode.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Nearby places we cover
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Chester-le-Street
- Hob and oven installation in Houghton-le-Spring
- Hob and oven installation in Stanley
- Hob and oven installation in Washington
- Hob and oven installation in Bishop Auckland
- Hob and oven installation in Peterlee
- Hob and oven installation across County Durham
