Hob and oven installation · Hampshire
Hob and oven installation in Basingstoke
Hob and oven installation in Basingstoke starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Who usually needs hob and oven installation in Basingstoke?
Families in Basingstoke adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.
Landlords in Hampshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. Kitchens in every part of Basingstoke are covered, and the survey visit is free wherever you are in Hampshire.
What we cover for hob and oven installation in Basingstoke
Your written quote lists everything included. For hob and oven installation, that normally means:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Gas supply moved to a new hob position, with pipework tested and made good
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
How much does hob and oven installation cost in Basingstoke?
Typical hob and oven installation prices for homes in Basingstoke, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Basingstoke
Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Do you need approval for hob and oven installation in Basingstoke?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Getting the most from your hob and oven installation
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- If you are replacing an old cooker with a separate hob and oven in your Basingstoke kitchen, ask for the gas supply position and condition to be checked first.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Basingstoke
How much does hob and oven installation cost in Basingstoke?
Guide prices in Basingstoke are about £140 to £340 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Which parts of Basingstoke do you work in?
All of them. Our Hampshire coverage takes in the whole of Basingstoke, including the RG21 postcode district, as well as surrounding towns such as Alton. If you are unsure, send us your postcode.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation near Basingstoke
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Alton
- Hob and oven installation in Fleet
- Hob and oven installation in Thatcham
- Hob and oven installation in Yateley
- Hob and oven installation in Farnham
- Hob and oven installation in Aldershot
- Hob and oven installation across Hampshire