Flat-pack kitchen fitting in Basingstoke

When does flat-pack kitchen fitting make sense in Basingstoke?

If your kitchen is in a Basingstoke flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

If you have bought a flat-pack kitchen for your Basingstoke home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. We work throughout Basingstoke (RG21) and across the wider Hampshire area.

What does flat-pack kitchen fitting in Basingstoke include?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Basingstoke kitchen after we have measured it:

Back panels fitted fully into their grooves or fixed as the instructions require
Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall

What should you budget for flat-pack kitchen fitting in Basingstoke?

The figures below are guide prices for Basingstoke, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What should you budget for flat-pack kitchen fitting in Basingstoke?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Basingstoke?

In and around Basingstoke, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Basingstoke

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Set aside a room next to the kitchen in your Basingstoke home for assembly, with enough floor space to lay a tall larder carcass down flat.
If the flat-pack sink base in your Basingstoke kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Basingstoke

How much does flat-pack kitchen fitting cost in Basingstoke?

Flat-pack kitchen fitting in Basingstoke typically costs £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Basingstoke as well?

Yes. As well as Basingstoke itself, we cover the rest of Hampshire and nearby towns such as Alton and Fleet. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Flat-pack kitchen fitting in neighbouring towns

Close to Basingstoke? We cover these nearby towns too: