Hob and oven installation · Devon
Hob and oven installation in Ilfracombe
We take on hob and oven installation in Ilfracombe and the surrounding EX34 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Why hob and oven installation for an Ilfracombe home?
Some people in Ilfracombe buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.
A new kitchen layout in Ilfracombe sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Homes right across Ilfracombe are covered, as are nearby places such as Barnstaple, Bideford and the villages in between.
What is in a typical job?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Ilfracombe?
The figures below are guide prices for Ilfracombe, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Ilfracombe homes
Across Devon you will often find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, and each shapes the kitchen differently. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.
Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.
What rules apply to hob and oven installation in Ilfracombe?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.
Before you book hob and oven installation in Ilfracombe
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Before buying an induction hob for your Ilfracombe home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Devon.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Ilfracombe
How much does hob and oven installation cost in Ilfracombe?
Guide prices in Ilfracombe are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you work near Ilfracombe as well?
Yes. As well as Ilfracombe itself, we cover the rest of Devon and nearby towns such as Barnstaple and Bideford. The process is the same wherever the kitchen is.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Also covering nearby towns
The same service is available a short drive from Ilfracombe, including:
- Hob and oven installation in Barnstaple
- Hob and oven installation in Bideford
- Hob and oven installation across Devon