Flat-pack kitchen fitting in Washington

Is flat-pack kitchen fitting right for your Washington kitchen?

A Washington kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

First-time buyers in Washington often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating. Kitchens in every part of Washington are covered, and the survey visit is free wherever you are in Tyne and Wear.

What is in a typical job?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Washington it usually covers:

Base units levelled on adjustable legs and fixed to the wall and to each other
Panels, plinths, sink, tap and appliance connections to existing points
Laminate worktops cut and jointed, with cut edges sealed around the sink
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room

What does flat-pack kitchen fitting cost in Washington?

Use these ranges to plan your budget. They include VAT, reflect costs in the North East, and are firmed up once we have seen your Washington kitchen. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

What does flat-pack kitchen fitting cost in Washington?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,600–£2,700
Medium flat-pack kitchen, built and fittedAs above	£2,500–£3,800
Large flat-pack kitchen with tall units, built and fittedAs above	£3,600–£5,000

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Washington, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

What rules apply to flat-pack kitchen fitting in Washington?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Planning ahead

If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If the flat-pack sink base in your Washington kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in Washington

How much does flat-pack kitchen fitting cost in Washington?

For a small flat-pack kitchen, built and fitted, budget around £1,600 to £2,700 including VAT in Washington. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Which parts of Washington do you work in?

All of them. Our Tyne and Wear coverage takes in the whole of Washington, including the NE37 and NE38 postcode districts, as well as surrounding towns such as Chester-le-Street. If you are unsure, send us your postcode.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Also covering nearby towns

We also carry out flat-pack kitchen fitting in these towns near Washington: