Supply and fit kitchens in Washington

Why supply and fit kitchens for a Washington home?

If you are weighing up a premium or made-to-measure kitchen for a Washington home, planning the lead time early helps the fit line up with any other building work.

If you are planning a new kitchen for your Washington home and have not yet chosen a range, a survey first means the design starts from real measurements. Kitchens in every part of Washington are covered, and the survey visit is free wherever you are in Tyne and Wear.

What is included in the work?

After the survey visit we write the scope down. For supply and fit kitchens in Washington it usually covers:

Delivery received by us and every item checked before fitting begins
Units, worktops, sink and appliances fitted, with stone templated after the base units
Splashbacks, tiling, flooring and a final check together before handover
Free survey visit with full measurements and a check of the services
Help choosing door styles, carcass construction, worktops, sinks and appliances
Units, panels, plinths, worktops and fixings ordered to the agreed plan

Guide prices for supply and fit kitchens in Washington

As a starting point for Washington, these ranges include VAT at 20% and allow for typical labour costs in the North East. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for supply and fit kitchens in Washington
Typical project	Guide price
Budget refit, supplied and fittedStandard units, laminate worktops, essential appliances	£7,200–£16,200
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances	£16,200–£31,500
Premium kitchen, supplied and fittedDesigner ranges, stone worktops, premium appliances	£31,500–£67,500

Supply-and-fit ranges include design, units, worktops, the appliances described, fitting and the electrics, plumbing and finishes a typical refit needs; knock-throughs, new gas runs and major replastering are quoted separately. Prices include VAT at 20%.

House types around Washington and what they mean for a kitchen

You will find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses throughout Tyne and Wear. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

Do you need approval for supply and fit kitchens in Washington?

A supplied and fitted kitchen needs no planning permission in England, except where listed building consent applies or a new vent is cut through the outside wall of a flat. New circuits and consumer units are notifiable under Part P and certified through a competent person scheme or building control. Cooker hoods are planned to meet Approved Document F, and gas hobs are connected by Gas Safe registered engineers.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Planning ahead

Leave room in the budget for smaller extras such as under-cabinet lighting, a plinth heater or extra sockets that come up once the layout is settled.
Bring photos of kitchens you like to the survey; they help turn a general idea into specific door styles, colours and worktop choices.
If your Washington home is older, ask whether walls and floors need preparing before fitting, as that work is easier to price at the design stage.
Read the payment terms in the written quote before ordering, including what is due at each stage, as the kitchen is ordered specifically for you.

Questions about supply and fit kitchens in Washington

How much do supply and fit kitchens cost in Washington?

For a budget kitchen, supplied and fitted, budget around £7,200 to £16,200 including VAT in Washington. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Washington?

Yes. We work across Washington, including the NE37 and NE38 postcode districts, and nearby towns such as Chester-le-Street and Felling. Book a free survey visit and we will arrange a time that suits you.

Is kitchen design included when you supply the kitchen?

Yes. The measured survey, layout plan and specification are part of the supply-and-fit price rather than a separate charge. You see the layout, door and worktop choices and appliance positions before ordering, and changes are made at the planning stage, when they are simple to redraw. The agreed plan is what we order from and what the fitters work to.

How long does a supplied kitchen take to arrive?

Roughly four to six weeks for budget ranges, six to ten weeks for mid-range and twelve to twenty weeks for premium ranges, counted from the order. Bespoke and made-to-measure kitchens typically take longer. Stone worktops are templated once the base units are fixed and fitted about one to two weeks later. We confirm the expected lead time for your chosen range before you commit to an order.

Can I choose my own appliances with a supply and fit kitchen?

Yes. You can choose appliances through us as part of the specification or buy them yourself. If you buy them, send us the model details before the design is finalised, so housings, ventilation gaps, door-fixing kits and power points are planned around them. Any manufacturer cover on appliances you buy stays with you and the retailer you bought them from.

Nearby places we cover

Close to Washington? We cover these nearby towns too: