Kitchen Installers UK
0800 088 6341 Get a guide price

Flat-pack kitchen fitting · England

Flat-pack kitchen fitting in Greater Manchester

Flat-pack kitchen fitting in Greater Manchester starts with a free visit to measure up, then a written scope and quote before any work begins.

Guide price£1,700 to £5,200
Towns covered42 towns, including Manchester
Timescale4 to 6 days for a small kitchen
Get a guide price Book a free survey visit
A fitter assembling a white flat-pack base cabinet on a dust sheet, with cam fittings and a cordless drill beside it

When does flat-pack kitchen fitting make sense in Greater Manchester?

Landlords in Greater Manchester sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

A Greater Manchester kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

What does flat-pack kitchen fitting in Greater Manchester include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Free survey visit to check the plan, the boxes and the room
  • Carcasses assembled on site on a flat surface and checked for square
  • Back panels fitted fully into their grooves or fixed as the instructions require
  • Base units levelled on adjustable legs and fixed to the wall and to each other
  • Wall units hung on hanging rails or brackets fixed securely into the wall
  • Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
  • Laminate worktops cut and jointed, with cut edges sealed around the sink
  • Panels, plinths, sink, tap and appliance connections to existing points

How much does flat-pack kitchen fitting cost in Greater Manchester?

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

How much does flat-pack kitchen fitting cost in Greater Manchester?
Typical projectGuide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above£2,700–£4,000
Large flat-pack kitchen with tall units, built and fittedAs above£3,800–£5,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes across Greater Manchester

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

A common terrace project is opening the back kitchen into the middle room to make a kitchen-diner. Converted mill and warehouse flats often have open-plan kitchens against exposed brick or concrete, which affects how units, shelves and extraction are fixed.

Rules for flat-pack kitchen fitting in Greater Manchester

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you start

  • Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.
  • Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
  • Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.
  • Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
  • If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
  • Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.

Questions about flat-pack kitchen fitting in Greater Manchester

How much does flat-pack kitchen fitting cost in Greater Manchester?

Guide prices in Greater Manchester are about £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Greater Manchester?

Yes. We carry out flat-pack kitchen fitting across Greater Manchester, including Manchester, Oldham, Wigan and Bolton. Every job starts with a free survey visit and an itemised written quote.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Flat-pack kitchen fitting in towns across Greater Manchester

Choose a town for local guide prices and postcode coverage:

Flat-pack kitchen fitting in nearby areas

Free survey visit

Book a free survey visit in Greater Manchester

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price