Utility room fitting in Oldham

Why utility room fitting for an Oldham home?

When a new kitchen is being planned in Greater Manchester, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.

If the kitchen in your Greater Manchester home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. Kitchens in every part of Oldham are covered, and the survey visit is free wherever you are in Greater Manchester.

What is in a typical job?

Your written quote lists everything included. For utility room fitting, that normally means:

Free survey visit to check water, waste, power and outside wall positions
Extract fan fitted to clear moisture from washing and drying
Utility sink and tap plumbed in, with new supplies and waste where none exist
A vent to outside for a vented dryer, or a drain hose for condenser models
Base, wall and tall units fitted, levelled and fixed to the wall
Washing machine supply, waste and isolation valve, tested for leaks

What should you budget for utility room fitting in Oldham?

The figures below are guide prices for Oldham, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for utility room fitting in Oldham?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£950

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Oldham

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Oldham

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you book utility room fitting in Oldham

In an Oldham flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Before choosing a dryer for your Oldham utility, check whether there is an outside wall close enough for a short, straight vent duct.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Oldham

How much does utility room fitting cost in Oldham?

Guide prices in Oldham are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Oldham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Oldham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Nearby places we cover

The same service is available a short drive from Oldham, including: