Flat-pack kitchen fitting in Nantwich

Why do people in Nantwich choose flat-pack kitchen fitting?

If you have bought a flat-pack kitchen for your Nantwich home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

If you are fitting a utility room as well as a kitchen in Nantwich, flat-pack units for both rooms can be built and fitted as part of the same job. Nantwich sits about 23 miles south of Warrington, and our Cheshire coverage takes in everything in between.

What does flat-pack kitchen fitting in Nantwich include?

The exact scope is agreed after the survey, but a typical job in Nantwich covers:

Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other

Flat-pack kitchen fitting prices in Nantwich

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Flat-pack kitchen fitting prices in Nantwich
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,700–£4,000
Large flat-pack kitchen with tall units, built and fittedAs above	£3,800–£5,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Nantwich homes

The housing mix across Cheshire includes Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages, so no two kitchen fits are quite alike. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap. Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door.

Building regulations, electrics and gas in Nantwich

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Getting the most from your flat-pack kitchen fitting

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If your Nantwich home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Set aside a room next to the kitchen in your Nantwich home for assembly, with enough floor space to lay a tall larder carcass down flat.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Nantwich

How much does flat-pack kitchen fitting cost in Nantwich?

Flat-pack kitchen fitting in Nantwich typically costs £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Nantwich as well?

Yes. As well as Nantwich itself, we cover the rest of Cheshire and nearby towns such as Crewe and Sandbach. The process is the same wherever the kitchen is.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Nearby places we cover

Neighbouring towns where we offer flat-pack kitchen fitting: