Flat-pack kitchen fitting in Greenford

Why do people in Greenford choose flat-pack kitchen fitting?

A Greenford kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

Landlords in Greater London sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. Kitchens in every part of Greenford are covered, and the survey visit is free wherever you are in Greater London.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Greenford covers:

Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Base units levelled on adjustable legs and fixed to the wall and to each other

Guide prices for flat-pack kitchen fitting in Greenford

As a starting point for Greenford, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for flat-pack kitchen fitting in Greenford
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Greenford

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to flat-pack kitchen fitting in Greenford?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Greenford homeowners

If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If your Greenford home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If the flat-pack sink base in your Greenford kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.

Questions about flat-pack kitchen fitting in Greenford

How much does flat-pack kitchen fitting cost in Greenford?

Guide prices in Greenford are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Greenford do you work in?

All of them. Our Greater London coverage takes in the whole of Greenford, including the UB6 postcode district, as well as surrounding towns such as Northolt. If you are unsure, send us your postcode.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Nearby places we cover

Close to Greenford? We cover these nearby towns too: