Flat-pack kitchen fitting · Greater London
Flat-pack kitchen fitting in South Ruislip
Whether your South Ruislip kitchen is a narrow galley or an open-plan room, flat-pack kitchen fitting follows the same careful order: survey, written scope, fit and a final check together.

Thinking about flat-pack kitchen fitting in South Ruislip?
A South Ruislip kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.
Flat-pack is a common choice in South Ruislip when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Kitchens in every part of South Ruislip are covered, and the survey visit is free wherever you are in Greater London.
What is included in the work?
After the survey visit we write the scope down. For flat-pack kitchen fitting in South Ruislip it usually covers:
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Free survey visit to check the plan, the boxes and the room
- Back panels fitted fully into their grooves or fixed as the instructions require
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Guide prices for flat-pack kitchen fitting in South Ruislip
The figures below are guide prices for South Ruislip, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Prices in London usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £2,300–£3,900 |
| Medium flat-pack kitchen, built and fittedAs above | £3,600–£5,500 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £5,200–£7,200 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Fitting kitchens in older and newer South Ruislip homes
In and around South Ruislip, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.
Building regulations, electrics and gas in South Ruislip
Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Getting the most from your flat-pack kitchen fitting
- Count the boxes against the delivery note when your flat-pack kitchen arrives in South Ruislip; orders can run to dozens of boxes and one short box can stall a fit.
- If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
- Set aside a room next to the kitchen in your South Ruislip home for assembly, with enough floor space to lay a tall larder carcass down flat.
- Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
Questions about flat-pack kitchen fitting in South Ruislip
How much does flat-pack kitchen fitting cost in South Ruislip?
Flat-pack kitchen fitting in South Ruislip typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of South Ruislip do you work in?
All of them. Our Greater London coverage takes in the whole of South Ruislip, including the HA4, HA5 and UB10 postcode districts, as well as surrounding towns such as Ruislip. If you are unsure, send us your postcode.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
How do you make sure flat-pack cabinets are square?
Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.
What is the difference between flat-pack and rigid kitchen units?
Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.
Also covering nearby towns
The same service is available a short drive from South Ruislip, including:
- Flat-pack kitchen fitting in Ruislip
- Flat-pack kitchen fitting in Northolt
- Flat-pack kitchen fitting in Hayes, Greater London
- Flat-pack kitchen fitting in Pinner
- Flat-pack kitchen fitting in Greenford
- Flat-pack kitchen fitting in Uxbridge
- Flat-pack kitchen fitting across Greater London
