Flat-pack kitchen fitting in Sudbury, Greater London

Is flat-pack kitchen fitting right for your Sudbury, Greater London kitchen?

Landlords in Greater London sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

First-time buyers in Sudbury, Greater London often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating. We work throughout Sudbury, Greater London (HA0) and across the wider Greater London area.

What is in a typical job?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall

Guide prices for flat-pack kitchen fitting in Sudbury, Greater London

As a starting point for Sudbury, Greater London, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for flat-pack kitchen fitting in Sudbury, Greater London
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Sudbury, Greater London

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Sudbury, Greater London

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Set aside a room next to the kitchen in your Sudbury, Greater London home for assembly, with enough floor space to lay a tall larder carcass down flat.
If your Sudbury, Greater London home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Sudbury, Greater London

How much does flat-pack kitchen fitting cost in Sudbury, Greater London?

Flat-pack kitchen fitting in Sudbury, Greater London typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Sudbury, Greater London do you work in?

All of them. Our Greater London coverage takes in the whole of Sudbury, Greater London, including the HA0 postcode district, as well as surrounding towns such as Brent. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting in neighbouring towns

Neighbouring towns where we offer flat-pack kitchen fitting: