Flat-pack kitchen fitting in Cirencester

What prompts flat-pack kitchen fitting in Cirencester?

If you have bought a flat-pack kitchen for your Cirencester home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

Landlords in Gloucestershire sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. If your home is in Cirencester or close by in Stroud or Malmesbury, the same survey, quote and fitting process applies.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate worktops cut and jointed, with cut edges sealed around the sink
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Back panels fitted fully into their grooves or fixed as the instructions require
Wall units hung on hanging rails or brackets fixed securely into the wall
Base units levelled on adjustable legs and fixed to the wall and to each other

Guide prices for flat-pack kitchen fitting in Cirencester

Typical flat-pack kitchen fitting prices for homes in Cirencester, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.

Guide prices for flat-pack kitchen fitting in Cirencester
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Cirencester, homes range across cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.

Regulations for kitchen work in Cirencester

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Tips before you start

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If the flat-pack sink base in your Cirencester kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Set aside a room next to the kitchen in your Cirencester home for assembly, with enough floor space to lay a tall larder carcass down flat.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Cirencester

How much does flat-pack kitchen fitting cost in Cirencester?

For a small flat-pack kitchen, built and fitted, budget around £1,900 to £3,100 including VAT in Cirencester. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Cirencester as well?

Yes. As well as Cirencester itself, we cover the rest of Gloucestershire and nearby towns such as Stroud and Malmesbury. The process is the same wherever the kitchen is.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting in neighbouring towns

We also carry out flat-pack kitchen fitting in these towns near Cirencester: