Kitchen underfloor heating in Cirencester

Why do people in Cirencester choose kitchen underfloor heating?

In a compact Cirencester kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer.

Many Cirencester kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage. If your home is in Cirencester or close by in Stroud or Malmesbury, the same survey, quote and fitting process applies.

What does kitchen underfloor heating in Cirencester include?

After the survey visit we write the scope down. For kitchen underfloor heating in Cirencester it usually covers:

A new circuit or fused spur, plus a thermostat with a floor sensor
Electric mats or cables, or wet pipework connected through a manifold
A survey of the subfloor, open floor area and existing heating system
Door thresholds and plinth heights checked against the new floor build-up
Screed, overlay boards or levelling compound, left to cure before finishes
Plinth heaters fitted under base units where wall space for a radiator is short

Kitchen underfloor heating prices in Cirencester

Typical kitchen underfloor heating prices for homes in Cirencester, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.

Kitchen underfloor heating prices in Cirencester
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£620–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,500–£4,100
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£260–£620

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Cirencester homes

You will find cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses throughout Gloucestershire. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs. Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap.

Building regulations, electrics and gas in Cirencester

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Tips before you start

Ask for the finished floor height to be worked out before you order units for your Cirencester kitchen, so plinths and appliances still fit.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Cirencester kitchen.
If you have a heat pump or a newer boiler in Gloucestershire, ask whether it can supply a wet floor zone or whether electric is simpler.
If the floor is small and there is no wall space for a radiator, a plinth heater under a base unit may be simpler.

Questions about kitchen underfloor heating in Cirencester

How much does kitchen underfloor heating cost in Cirencester?

Kitchen underfloor heating in Cirencester typically costs £620 to £1,500 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Cirencester do you work in?

All of them. Our Gloucestershire coverage takes in the whole of Cirencester, including the GL7 postcode district, as well as surrounding towns such as Stroud. If you are unsure, send us your postcode.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Kitchen underfloor heating in neighbouring towns

Close to Cirencester? We cover these nearby towns too: