Cooker hood installation in Cirencester

When does cooker hood installation make sense in Cirencester?

If your Cirencester kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

Homeowners in Cirencester adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. We cover all of Cirencester, including the GL7 postcode district, and travel out to neighbouring towns across Gloucestershire.

What we cover for cooker hood installation in Cirencester

Here is what usually goes into cooker hood installation, adjusted to your Cirencester kitchen after we have measured it:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Island and ceiling hoods fixed into the ceiling structure by two people
Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained

What does cooker hood installation cost in Cirencester?

Typical cooker hood installation prices for homes in Cirencester, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.

What does cooker hood installation cost in Cirencester?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Cirencester homes

The housing mix across Gloucestershire includes cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses, so no two kitchen fits are quite alike. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs. Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap.

What rules apply to cooker hood installation in Cirencester?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Practical advice for Cirencester homeowners

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Before choosing a hood for your Cirencester kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Cirencester

How much does cooker hood installation cost in Cirencester?

Guide prices in Cirencester are about £120 to £250 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Cirencester as well?

Yes. As well as Cirencester itself, we cover the rest of Gloucestershire and nearby towns such as Stroud and Malmesbury. The process is the same wherever the kitchen is.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Cooker hood installation in neighbouring towns

We also carry out cooker hood installation in these towns near Cirencester: