Flat-pack kitchen fitting in Alton

Is flat-pack kitchen fitting right for your Alton kitchen?

Some people in Hampshire start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part.

If you have bought a flat-pack kitchen for your Alton home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. We work throughout Alton (GU34) and across the wider Hampshire area.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Free survey visit to check the plan, the boxes and the room
Panels, plinths, sink, tap and appliance connections to existing points
Base units levelled on adjustable legs and fixed to the wall and to each other
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Carcasses assembled on site on a flat surface and checked for square

Guide prices for flat-pack kitchen fitting in Alton

As a starting point for Alton, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for flat-pack kitchen fitting in Alton
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Alton?

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Alton

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book flat-pack kitchen fitting in Alton

Set aside a room next to the kitchen in your Alton home for assembly, with enough floor space to lay a tall larder carcass down flat.
If your Alton home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Alton

How much does flat-pack kitchen fitting cost in Alton?

Guide prices in Alton are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Alton as well?

Yes. As well as Alton itself, we cover the rest of Hampshire and nearby towns such as Bordon and Farnham. The process is the same wherever the kitchen is.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting in neighbouring towns

Close to Alton? We cover these nearby towns too: