Fit-only kitchen fitting in Washington

Why do people in Washington choose fit-only kitchen fitting?

Some Washington households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start.

If you have chosen stone worktops for a Washington kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template. Washington sits about 6 miles south-east of Newcastle upon Tyne, and our Tyne and Wear coverage takes in everything in between.

What is included in the work?

Your written quote lists everything included. For fit-only kitchen fitting, that normally means:

Sink, tap and appliances connected to the existing water, waste and power points
Laminate or wood worktops cut, jointed, sealed and fixed down
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Free survey visit to check your plan, the room and the service positions
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Delivery checked against the plan and delivery note before fitting starts

Guide prices for fit-only kitchen fitting in Washington

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Costs across the North East tend to sit under UK averages, which these ranges reflect.

Guide prices for fit-only kitchen fitting in Washington
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Washington?

Typical homes in this part of Tyne and Wear include tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

Regulations for kitchen work in Washington

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Practical advice for Washington homeowners

Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Washington kitchen.
Before your kitchen is delivered to your Washington home, clear a dry room to store the boxes flat, away from damp garages and outbuildings.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Do not open or assemble anything before the survey; sealed boxes make it far easier to claim missing or damaged parts from the supplier.

Questions about fit-only kitchen fitting in Washington

How much does fit-only kitchen fitting cost in Washington?

For a small kitchen of 5 to 10 units, budget around £1,400 to £2,200 including VAT in Washington. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Washington before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Washington. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Fit-only kitchen fitting near Washington

The same service is available a short drive from Washington, including: