Fit-only kitchen fitting in Felling

What prompts fit-only kitchen fitting in Felling?

If you are renovating a house in Felling yourself, buying the kitchen direct and paying only for fitting keeps the choice of units and the budget in your hands.

If your kitchen is ordered for delivery to your Felling home and the retailer does not offer fitting, fit only covers the labour to put it in properly. Kitchens in every part of Felling are covered, and the survey visit is free wherever you are in Tyne and Wear.

What does the job involve?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Felling kitchen after we have measured it:

Delivery checked against the plan and delivery note before fitting starts
Free survey visit to check your plan, the room and the service positions
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Sink, tap and appliances connected to the existing water, waste and power points

Guide prices for fit-only kitchen fitting in Felling

Typical fit-only kitchen fitting prices for homes in Felling, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Felling
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Felling, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to fit-only kitchen fitting in Felling?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Before you book fit-only kitchen fitting in Felling

Book the fit for a date after the full delivery has arrived in Tyne and Wear; a split delivery is a common reason for a fit stalling halfway.
Photograph each pallet and any damaged box as it arrives at your Felling address, and note the damage on the delivery note before the driver leaves.
If you buy a worktop for a Felling kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Felling

How much does fit-only kitchen fitting cost in Felling?

For a small kitchen of 5 to 10 units, budget around £1,400 to £2,200 including VAT in Felling. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Felling?

Yes. We work across Felling, including the NE10 postcode district, and nearby towns such as Gateshead and Newcastle upon Tyne. Book a free survey visit and we will arrange a time that suits you.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Nearby places we cover

Neighbouring towns where we offer fit-only kitchen fitting: