Fit-only kitchen fitting in Caerphilly

Why fit-only kitchen fitting for a Caerphilly home?

If you are renovating a house in Caerphilly yourself, buying the kitchen direct and paying only for fitting keeps the choice of units and the budget in your hands.

Plenty of homeowners in Caerphilly buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. Caerphilly sits about 9 miles west of Newport, Gwent, and our Gwent coverage takes in everything in between.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Caerphilly covers:

Laminate or wood worktops cut, jointed, sealed and fixed down
Sink, tap and appliances connected to the existing water, waste and power points
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Delivery checked against the plan and delivery note before fitting starts

Fit-only kitchen fitting prices in Caerphilly

The figures below are guide prices for Caerphilly, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Costs across Wales tend to sit under UK averages, which these ranges reflect.

Fit-only kitchen fitting prices in Caerphilly
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,300
Medium kitchen (10–15 units)As above	£2,300–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,100
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Caerphilly?

Typical homes in this part of Gwent include valley terraces, Victorian villas, post-war council-built houses and new-build estates. Valley terraces often have a small kitchen in the rear extension, while Victorian villas in Newport and post-war houses in Cwmbran tend to have a separate kitchen and dining room.

Steep valley streets, terraces with steps up to the door and limited parking can make carrying long worktops difficult, so access is checked at the survey. Water across most of Gwent is soft to moderately soft, which is kinder to taps, though some areas are harder, so check with your supplier.

Building regulations, electrics and gas in Caerphilly

In Wales a fit-only kitchen needs no planning permission, though a listed building may need listed building consent. The electrics are where Wales differs: extending an existing circuit within a kitchen is notifiable under Part P, as are new circuits, so even an extra socket for an appliance is certified through a competent person scheme or building control. Gas hobs are connected by Gas Safe registered engineers only, and extraction should meet Approved Document F.

The northern edge of Gwent falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.

Before you book fit-only kitchen fitting in Caerphilly

If you buy a worktop for a Caerphilly kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Book the fit for a date after the full delivery has arrived in Gwent; a split delivery is a common reason for a fit stalling halfway.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Caerphilly

How much does fit-only kitchen fitting cost in Caerphilly?

For a small kitchen of 5 to 10 units, budget around £1,400 to £2,300 including VAT in Caerphilly. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Do you cover all of Caerphilly?

Yes. We work across Caerphilly, including the CF83 postcode district, and nearby towns such as Risca and Pontypridd. Book a free survey visit and we will arrange a time that suits you.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Also covering nearby towns

Neighbouring towns where we offer fit-only kitchen fitting: