Fit-only kitchen fitting in Cirencester

What prompts fit-only kitchen fitting in Cirencester?

Plenty of homeowners in Cirencester buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked.

Some Cirencester households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. If your home is in Cirencester or close by in Stroud or Malmesbury, the same survey, quote and fitting process applies.

What does the job involve?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Cirencester kitchen after we have measured it:

Free survey visit to check your plan, the room and the service positions
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Delivery checked against the plan and delivery note before fitting starts

Guide prices for fit-only kitchen fitting in Cirencester

Typical fit-only kitchen fitting prices for homes in Cirencester, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.

Guide prices for fit-only kitchen fitting in Cirencester
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,600
Medium kitchen (10–15 units)As above	£2,600–£3,600
Large kitchen (15+ units, island or tall larders)As above	£3,600–£4,600
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£190–£290 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Gloucestershire include cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs. Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap.

Do you need approval for fit-only kitchen fitting in Cirencester?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Tips before you start

Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Cirencester kitchen.
Photograph each pallet and any damaged box as it arrives at your Cirencester address, and note the damage on the delivery note before the driver leaves.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Cirencester

How much does fit-only kitchen fitting cost in Cirencester?

For a small kitchen of 5 to 10 units, budget around £1,500 to £2,600 including VAT in Cirencester. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Cirencester as well?

Yes. As well as Cirencester itself, we cover the rest of Gloucestershire and nearby towns such as Stroud and Malmesbury. The process is the same wherever the kitchen is.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Also covering nearby towns

The same service is available a short drive from Cirencester, including: