Splashbacks and tiling in Bridport

Is splashbacks and tiling right for your Bridport kitchen?

When a Bridport kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

If your Bridport home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. We work throughout Bridport (DT6) and across the wider Dorset area.

What does the job involve?

Here is what usually goes into splashbacks and tiling, adjusted to your Bridport kitchen after we have measured it:

Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Old tiles removed and walls prepared, patched or boarded where needed
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

What do splashbacks and tiling cost in Bridport?

As a starting point for Bridport, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

What do splashbacks and tiling cost in Bridport?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Bridport and what they mean for a kitchen

Typical homes in this part of Dorset include thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.

Building regulations, electrics and gas in Bridport

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Planning ahead

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
If your Dorset kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Bridport

How much do splashbacks and tiling cost in Bridport?

For a tiled splashback, budget around £150 to £410 including VAT in Bridport. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Bridport do you work in?

All of them. Our Dorset coverage takes in the whole of Bridport, including the DT6 postcode district, as well as surrounding towns such as Chard. If you are unsure, send us your postcode.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Also covering nearby towns

Close to Bridport? We cover these nearby towns too: