Kitchen electrics in Wells

Thinking about kitchen electrics in Wells?

Buyers of older houses across Somerset sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in.

Some Wells homeowners like their kitchen but run extension leads along the worktop; extra sockets on the existing circuit can solve that without a full refit. We work throughout Wells (BA5) and across the wider Somerset area.

What does the job involve?

Here is what usually goes into kitchen electrics, adjusted to your Wells kitchen after we have measured it:

A dedicated circuit for an oven, range cooker or induction hob where needed
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
First-fix cables and back boxes run before plastering or boarding
Accessible isolation switches for integrated appliances, reachable without pulling units out
Second fix of sockets, switches and appliance connections once tiling is done
A check of the consumer unit, existing circuits and earthing before the layout is fixed

What should you budget for kitchen electrics in Wells?

As a starting point for Wells, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

What should you budget for kitchen electrics in Wells?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£260–£520
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£520–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£310–£720

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Wells homes

In and around Wells, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

Regulations for kitchen work in Wells

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book kitchen electrics in Wells

Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
Expect the power to be off in parts of your Wells home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
If you let a property in Somerset, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.

Questions about kitchen electrics in Wells

How much do kitchen electrics cost in Wells?

For extra sockets or spurs on existing circuits, budget around £260 to £520 including VAT in Wells. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Wells as well?

Yes. As well as Wells itself, we cover the rest of Somerset and nearby towns such as Shepton Mallet and Glastonbury. The process is the same wherever the kitchen is.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Kitchen electrics in neighbouring towns

Neighbouring towns where we offer kitchen electrics: