Cooker hood installation in Tottenham

What prompts cooker hood installation in Tottenham?

If condensation runs down the windows of your Tottenham kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

If your Tottenham kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Tottenham sits about 8 miles north of Westminster, and our Greater London coverage takes in everything in between.

What does cooker hood installation in Tottenham include?

Here is what usually goes into cooker hood installation, adjusted to your Tottenham kitchen after we have measured it:

Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671
Core drilling through the outside wall and an external grille fitted and sealed
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance

Guide prices for cooker hood installation in Tottenham

As a starting point for Tottenham, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for cooker hood installation in Tottenham
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Tottenham homes

In and around Tottenham, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Tottenham

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Tottenham homeowners

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.

Questions about cooker hood installation in Tottenham

How much does cooker hood installation cost in Tottenham?

Cooker hood installation in Tottenham typically costs £160 to £310 including VAT for a like-for-like cooker hood swap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Tottenham as well?

Yes. As well as Tottenham itself, we cover the rest of Greater London and nearby towns such as Edmonton and Harringay. The process is the same wherever the kitchen is.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Also covering nearby towns

Close to Tottenham? We cover these nearby towns too: