Cooker hood installation in Tiverton

Why cooker hood installation for a Tiverton home?

If your Tiverton house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

Homeowners in Tiverton adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. We cover all of Tiverton, including the EX16 postcode district, and travel out to neighbouring towns across Devon.

What is included in the work?

After the survey visit we write the scope down. For cooker hood installation in Tiverton it usually covers:

Short, straight runs of rigid ducting wherever the route allows
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance
Hood fixed at the height set by the hood and hob manufacturers
Power supply connected by an electrician and tested to BS 7671

Guide prices for cooker hood installation in Tiverton

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Tiverton kitchen. Costs in the South West sit close to the national guide.

Guide prices for cooker hood installation in Tiverton
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Tiverton?

In and around Tiverton, homes range across cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

Do you need approval for cooker hood installation in Tiverton?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Before you book cooker hood installation in Tiverton

Before choosing a hood for your Tiverton kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
For an island hood in your Tiverton kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Check whether your Tiverton home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Tiverton

How much does cooker hood installation cost in Tiverton?

Cooker hood installation in Tiverton typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Tiverton?

Yes. We work across Tiverton, including the EX16 postcode district, and nearby towns such as Exeter and Honiton. Book a free survey visit and we will arrange a time that suits you.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Cooker hood installation near Tiverton

Neighbouring towns where we offer cooker hood installation: