Cooker hood installation in Stratford

Is cooker hood installation right for your Stratford kitchen?

If your Stratford house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

If condensation runs down the windows of your Stratford kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. We cover all of Stratford, including the E15 postcode district, and travel out to neighbouring towns across Greater London.

What we cover for cooker hood installation in Stratford

Here is what usually goes into cooker hood installation, adjusted to your Stratford kitchen after we have measured it:

Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Recirculating hoods fitted with carbon filters, and their limits explained
Hood fixed at the height set by the hood and hob manufacturers

What should you budget for cooker hood installation in Stratford?

The figures below are guide prices for Stratford, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for cooker hood installation in Stratford?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Stratford?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to cooker hood installation in Stratford?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book cooker hood installation in Stratford

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Check whether your Stratford home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
If you live in a flat in Greater London, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Stratford

How much does cooker hood installation cost in Stratford?

For a like-for-like cooker hood swap, budget around £160 to £310 including VAT in Stratford. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Can you measure up in Stratford before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Stratford. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in neighbouring towns

Close to Stratford? We cover these nearby towns too: