Cooker hood installation in Bow

Why do people in Bow choose cooker hood installation?

Homeowners in Bow adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

Cooks across Greater London who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. If your home is in Bow or close by in Stratford or Limehouse, the same survey, quote and fitting process applies.

What does the job involve?

Here is what usually goes into cooker hood installation, adjusted to your Bow kitchen after we have measured it:

Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671

What does cooker hood installation cost in Bow?

As a starting point for Bow, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does cooker hood installation cost in Bow?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Bow

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to cooker hood installation in Bow?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your cooker hood installation

If you live in a flat in Greater London, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
For an island hood in your Bow kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Bow

How much does cooker hood installation cost in Bow?

Guide prices in Bow are about £160 to £310 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Bow?

Yes. We work across Bow, including the E3 postcode district, and nearby towns such as Stratford and Limehouse. Book a free survey visit and we will arrange a time that suits you.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Cooker hood installation near Bow

Close to Bow? We cover these nearby towns too: