Cooker hood installation in Roehampton

When does cooker hood installation make sense in Roehampton?

Homeowners in Roehampton adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

If your Roehampton house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Our Greater London coverage reaches every part of Roehampton (SW15) and out towards Putney.

What is in a typical job?

After the survey visit we write the scope down. For cooker hood installation in Roehampton it usually covers:

Recirculating hoods fitted with carbon filters, and their limits explained
Hood fixed at the height set by the hood and hob manufacturers
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Survey of the hob position, duct route, outside wall and any open-flued appliance

What should you budget for cooker hood installation in Roehampton?

As a starting point for Roehampton, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for cooker hood installation in Roehampton?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to cooker hood installation in Roehampton?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Before choosing a hood for your Roehampton kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Check whether your Roehampton home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Roehampton

How much does cooker hood installation cost in Roehampton?

Cooker hood installation in Roehampton typically costs £160 to £310 including VAT for a like-for-like cooker hood swap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Roehampton?

Yes. We work across Roehampton, including the SW15 postcode district, and nearby towns such as Putney and Barnes. Book a free survey visit and we will arrange a time that suits you.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Cooker hood installation in neighbouring towns

The same service is available a short drive from Roehampton, including: