Cooker hood installation in Richmond, Greater London

Why do people in Richmond, Greater London choose cooker hood installation?

Homeowners in Richmond, Greater London adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

Cooks across Greater London who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We work throughout Richmond, Greater London (TW9) and across the wider Greater London area.

What we cover for cooker hood installation in Richmond, Greater London

Here is what usually goes into cooker hood installation, adjusted to your Richmond, Greater London kitchen after we have measured it:

Short, straight runs of rigid ducting wherever the route allows
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Power supply connected by an electrician and tested to BS 7671
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance

What should you budget for cooker hood installation in Richmond, Greater London?

Typical cooker hood installation prices for homes in Richmond, Greater London, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for cooker hood installation in Richmond, Greater London?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Richmond, Greater London

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Richmond, Greater London

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Check whether your Richmond, Greater London home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
For an island hood in your Richmond, Greater London kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Richmond, Greater London

How much does cooker hood installation cost in Richmond, Greater London?

Cooker hood installation in Richmond, Greater London typically costs £160 to £310 including VAT for a like-for-like cooker hood swap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Richmond, Greater London?

Yes. We work across Richmond, Greater London, including the TW9 postcode district, and nearby towns such as Isleworth and Hounslow. Book a free survey visit and we will arrange a time that suits you.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Nearby places we cover

The same service is available a short drive from Richmond, Greater London, including: