Fit-only kitchen fitting in Northampton

Is fit-only kitchen fitting right for your Northampton kitchen?

A Northampton kitchen with sound walls and services already in the right place suits fit only well, because the job is mainly units, worktops and connections.

People in Northamptonshire who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. Homes right across Northampton are covered, as are nearby places such as Wellingborough, Towcester and the villages in between.

What we cover for fit-only kitchen fitting in Northampton

Your written quote lists everything included. For fit-only kitchen fitting, that normally means:

Free survey visit to check your plan, the room and the service positions
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Delivery checked against the plan and delivery note before fitting starts
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Sink, tap and appliances connected to the existing water, waste and power points
Laminate or wood worktops cut, jointed, sealed and fixed down

Guide prices for fit-only kitchen fitting in Northampton

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Northampton kitchen. Prices across the East Midlands are broadly in line with UK averages.

Guide prices for fit-only kitchen fitting in Northampton
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,400
Medium kitchen (10–15 units)As above	£2,400–£3,400
Large kitchen (15+ units, island or tall larders)As above	£3,400–£4,400
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£270 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Northampton, homes range across ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.

Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering. Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops.

Do you need approval for fit-only kitchen fitting in Northampton?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.

Practical advice for Northampton homeowners

Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Book the fit for a date after the full delivery has arrived in Northamptonshire; a split delivery is a common reason for a fit stalling halfway.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Northampton

How much does fit-only kitchen fitting cost in Northampton?

For a small kitchen of 5 to 10 units, budget around £1,500 to £2,400 including VAT in Northampton. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Which parts of Northampton do you work in?

All of them. Our Northamptonshire coverage takes in the whole of Northampton, including the NN1 postcode district, as well as surrounding towns such as Wellingborough. If you are unsure, send us your postcode.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Also covering nearby towns

Close to Northampton? We cover these nearby towns too: